dartfords

Yellow Metal Complex Wood Dye Powder - 1oz, 28g

In stock - 19 items available
SKU: RF4102
(0)
£15.49 inc. VAT

Like what you see? Share this with your crafty buddies.

Powdered dye for interior woodworking projects, available in a wide selection of wood and rainbow colours
Dissolves in water or alcohol - synthetic methanol is recommended, such as found in our Shellac & Aniline Thinners
Metal complex dyes have the best lightfastness of all of our powdered dyes and will only very gradally fade when exposed to UV
14 g makes approximately 1 litre of dye

Questions & Answers

Have a Question?

Be the first to ask a question about this.

Ask a Question
  • Product Type Metal Complex Wood Dye Powder
  • Finishing System wood dye
  • Application Method brush,sponge,cloth
  • Usage interior
  • Colour Code CC478
  • Colour Group yellow
  • Colour & Pattern Yellow
  • Size 1oz
  • Weight 28g
  • Weight 28g
  • SKU RF4102
  • Barcode 5055720124685
  • MPN RF4102
To dissolve in water we recommend using hot, but not boiling, water. Always start by putting the water into a suitable glass, plastic (HDPE) or ceramic container, and then gradually add the powder. Stir the solution while adding, and then stir occasionally over the course of 10-15 minutes to ensure all powder is dissolved. Allow to cool before use. To dissolve in alcohol we recommend our Shellac & Aniline Thinners, which are a Synthetic Methanol solvent. Alternatively Methanol (wood alcohol) or denatured alcohol can be used, but these are not as effective. Always start by putting the solvent into a suitable glass, plastic (HDPE) or ceramic container, and then gradually add the powder. Stir the solution while adding, and then stir occasionally over the course of 30-60 minutes to ensure all powder is dissolved. If dissolved in alcohol the dye can be added to our nitrocellulose lacquer to tint it. If doing this, strain the solution before adding to ensure no undissolved lumps enter into the lacquer and your spray equipment. Using a 75:25 mixture of Shellac & Aniline Thinners and Acetone can help to dissolve the solution in to nitrocellulose lacquer. The mixed stain can be applied to wood with a sponge, cloth or brush. These 14g (1/2oz) packets will create: 1 litre of normal strength stain 2 litres of wash coat 1/2 litre of concentrated stain