Mixol multi-purpose stainer and tinting concentrate is a high quality product that has proven itself for more than 35 years. It is highly concentrated and can be added to almost any type of paint and/or coating materials. Mixol is not a ready-made paint, but a binder-free concentrate. It can only be used when added to a ready made paint/material. Depending on the paint/material concerned, Mixol can be added up to a maximum of 10% by weight. But considering that it is highly concentrated, you can obtain best results by adding a minimum of Mixol. Not all kinds of materials are tintable. Please first test that the materials are compatible and do not seperate. As a rule, the following materials can be tinted with Mixol: Radiator paints, epoxy resin paints, fillers and primers, polyurethane paints, synthetic resin paints, hammer-tone finishes, latex emulsion finishes, nitro-cellulose lacquers, polymer emulsion paints, chlorinated rubber paints, acrylic and alkyd resin paints, cold-water paints, cement colourings, water-based paints, acrylic latex paints, concrete floor paints, synthetic latex paints, glue-bound distempers, plasters and renderings, scumbles, stains and wood waxes, spactling pastes, pre-mixed fibrous and filler materials. The maximum additions are: 10 % to latex and/or emulsion paints, 5–8% to paints, lacquers, varnishes, high-solids, 6% to acrylic paints, 3–5 % to transparent and/or clear lacquers, transparent paints, glazes, wood stains, waxes etc., 3% for silicate and silicone paints and/or coatings. Use only Mixol oxide tints in varnishes low in or free from aromatic compounds or in paints containing silicate or silicone resin.
For many years now,Rothko and Frost have enjoyed the well-earned reputation as being the premier makers of completely accurate high quality reproductions offender headstock stickers. What happened to you guys? Did you get spooked by Fender's ridiculous cease and desist campaign? Even the samples on your website don't look right anymore. I took a chance because of your stellar reputation but the decals you sent me are comically bad. I would never use them on my prized 62' Strat. It's very sad.
Big hat off to the Rothko & Frost team. I’ve used them before and honestly they supply the best decals for guitar headstocks I have ever used. They’re ultra thin and surprisingly more durable than you’d think. Very easy to apply and always come with a how to guide. So if you’re wanting to update a headstock and struggling with who to use. These are your people and they have the products to do what you need. Also just pop them an email, I have before and again very friendly and informative.
Custom Banner Waterslide Decal Transfers x2
Lawrence Wagner
Perfect match for the restoration of a 73 Telecaster
Perfect match for the restoration of a 73 Telecaster. The guitar was in a basement flood and the neck needed to be completely refinished. The decal fit perfectly and looks great! Thank you.
Telecaster Restoration Headstock Decals x2
Michael Bigelow
First time laying down a waterslide
After reading up on waterslides I wasn't too confident going into this. I have carpal tunnel and working with small and delicate things can be challenging at times. I figured putting this on would be nearly impossible for me. On top of that, they also state that theirs are more finicky than others...Well, I didn't have a single issue and nailed it on the first attempt. Cutting the decal off of the sheet was more difficult for me than installing it. Perfect! Looks like it was done by Fender.
Custom 70s Curve Up Style Guitar Headstock Waterslide Decal Transfer x2
Dwight Cunningham / Luthier
It Limes really well after I mixed it in the resin, easy to work with
It Limes really well after I mixed it in the resin
Blue Luminescent Glow Pigment - 100g 65-75um
Arundel Guitars
Well made
Well made, excellent quality and usability. Highly rdended
