Find out below the process and materials required to finish a guitar body in a variety of guitar finishes and for a selection of the most common and popular guitar...
Read MoreYou will need-Some Titebond Original wood glue. Squeegee Sharp craft knife and possibly a pair of scissors.2x Sanding sealer aerosols or 1 230ml tin for your spray gun.Clear finishing coat such as...
Read MoreMany of you have requested this. So here we go. • Nitrocellulose lacquer is susceptible to ‘blooming’ if sprayed in humid conditions. This can be easily fixed by lightly sanding...
Read More
So you want to apply a waterslide decal, eh? You are in luck my friend, here is a handy how to guide for your reading delight! Our decals are quite...
Read MoreMany personalised and custom items can be ordered directly through our website at fixed prices. If you need something not listed online, or have some more specific questions or requirements,...
Read More'Blooming' is an effect caused by moisture being trapped in the nitrocellulose lacquer finish as it dries. This most often occurs when the lacquer is sprayed in cold or humid...
Read MoreIf you have your own design, for example your company logo, signature, or a special emblem, we can make this into your own bespoke waterslide decals. Listen up folks, these...
Read MoreNitrocellulose lacquer is a fast drying solvent based spray on lacquer. It is suitable for use over the following finishes: Cellulose Sanding SealerShellac Sanding SealerTinted (Coloured but see-through) Nitrocellulose LacquersSolid...
Read More
Nitrocellulose Lacquer Gloss Nitrocellulose Lacquer should be allowed to dry at room temperature for two weeks before polishing is performed. This allows the lacquer to settle and harden, allowing for...
Read More
Oil finishes give wood a natural, tactile feel that lacquers and varnishes can't match. They're relatively forgiving to apply, don't require spray equipment, and bring out the grain beautifully. If...
Read More