3 Epoxy Coating Resin Kit - 15Kg

GlassCast 3 is the world-famous clear epoxy coating resin used to create stunning glossy coatings on existing floors, decorative floors, artwork, bar-tops, counter-tops and furniture. GlassCast 3 is easy-to-use, hard-wearing, self-levelling and has excellent UV resistance. Choose GlassCast 3 for any project where a relatively thin but flat, glossy surface is the most important requirement. This is because GlassCast 3 uses special additives which keep the surface of the resin super-flat and glossy, however these additives start to affect the clarity of the resin once it's more than around 5mm thick making it the perfect resin for floors. GlassCast 3 Recommended Uses Penny Floors Decorative floors (adding pigments and metallic powders) Bartops and kitchen worktops (with or without pigments and effects) Resin-art (adding pigments, tints and other effects) Furniture (such as resin plank tables) Agate coasters Artwork and Resin Art (coating art, photography and more) GlassCast 3 Advantages GlassCast 3 has been developed to be as easy to use and reliable as possible. Special additives used in the resin mean the cured surface is as flat and glossy as possible, unbeaten by any other resin on the market. GlassCast 3 professional resin also uses advanced resin technology to expel trapped air-bubbles whilst it cures, meaning that jobs where a heat-gun or blowtorch can't be used - such as a large floor - can still be completed with glorious bubble-free resin. To prevent yellowing or discolouration, GlassCast 3 uses an industry leading UV resistant formulation which ensures that it will continue to look fantastic for years to come. Even so, GlassCast resins are only recommended for indoor applications. Once fully cured, GlassCast 3 is incredibly hard-wearing, similar to the toughness of epoxies used in warehouse or industrial flooring! If the resin does eventually start to get marked by daily use, it can be polished back up to a mirror finish using specialist polishing compounds. Very clear with incredible flat, glossy surface finish Easy-to-use, self-releases trapped air bubbles Highly UV resistant Very tough and scratch-resistant Trusted by thousands of users worldwide! Outdoor Use Despite the very good advanced 'UV' resistant formulation of our Glass Cast resins, we don't suggest using the GlassCast range of resins for permanent, outdoor applications. This is down to epoxy chemistry meaning that eventually, over time, depending on UV exposure, environmental conditions etc, the resins will always eventually yellow in outdoor conditions. How visible this is depends on factors such as the underlying colour and conditions experienced. We simply don’t have the longevity of testing to be able to guarantee how long it will be before the resin may start to deteriorate in direct sunlight, adverse weather conditions (freezing in winter, high temps in summer), water pooling or sitting on top, etc. We have got customers who have used it for such applications but the advice would be to either put the outdoor projects away between uses or to have a cover to protect it if no other product (yacht varnish, etc.) would suit your project. Ambient Temperature, Pot-Life and Pour Depth The GlassCast range of resins, in common with all epoxies, generate heat as part of the curing process. The amount of time the mixed resin can spend in the pot, as well as the maximum depth it can be poured at, will vary depending on the ambient temperature. For best results, we recommend working in a consistent room temperature of 18-20°C. GlassCast can be used in temperatures from 15 to 25°C but higher temperatures will reduce the pot-life and the maximum pour-depth of the resin significantly, as shown in the table below. Ambient Temperature 15°C (minimum) 20°C (minimum) 25°C (minimum) Maximum Time in Pot (Pot Life) 45 mins 30 mins 22 mins Maximum Pour Depth 9mm 6mm 3mm Initial Cure 36 hrs 24 hrs 18 hrs How to Use GlassCast 3 has been developed for professional users to produce the best results possible. It is not a 'craft' product and not intended for children. Before purchase, storage or use you must read the safety and technical data. Having said that, GlassCast 3 is incredibly easy-to-use and delivers fantastic results under a wide range of conditions. GlassCast 3 is sold as a kit which includes both the resin and hardener. Take a look at our Resin Calculator to work out how much GlassCast you need for your project. When you are ready to pour, measure the resin and hardener at the correct ratio and mix thoroughly. Add any pigments or effects and then pour the resin - no more than about 5mm deep - onto your prepared floor, surface or artwork. The resin will reach initial cure in around 24hrs. Download the Technical Datasheet from the 'Downloads' tab for full details on correct measuring, mixing and use of the product. Getting More Creative - Pigments, Tints and Metallics Although GlassCast 3 is often used completely clear - over existing flooring or a wooden table-top, for example - it is also compatible with our complete range of tints, pigments and metallic-effect powders. Many other colours and powders can be added too but be sure to conduct a test to ensure compatibility. Metallic effect SHIMR powders for swirling, sparkling colour CULR epoxy colour pigments for see-through to opaque in a wide range of colours Pinata alcohol inks for vibrant, translucent colour If you are looking for a casting resin rather than a coating resin our GlassCast 10 or GlassCast 50 will be more suitable.